Journal of International Society for Science and Engineering

Author Index

A

Abdalla, Hany Punching Shear Behavior of Reinforced Concrete Flat Slabs with Steel Shearheads [Volume 3, Issue 4, 2021, Pages 76-87]
Abdalla, Hany Punching Shear Behaviour of Flat Slabs Reinforced with U-Stirrups [Volume 4, Issue 1, 2022, Pages 21-30]
Abdalla, Hany Ahmed Torsion Behavior of Recycled Aggregates Concrete Beams With Openings [Volume 4, Issue 3, 2022, Pages 65-73]
ABDALLA, HANY Experimental Non-linear Shear Behavior and Failure Mechanism of Low-Strength Reinforced Concrete Beams Strengthened with CFRP [Volume 4, Issue 1, 2022, Pages 12-20]
Abdelaziz, Bassem Punching Shear Behavior of Reinforced Concrete Flat Slabs with Steel Shearheads [Volume 3, Issue 4, 2021, Pages 76-87]
Abdeldayem, Abdelaziz Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste [Volume 4, Issue 2, 2022, Pages 40-48]
Abdel-Khalek, Mohamed A Maximum Utilization of Energy Source Minerals Using Mineral Processing Techniques: A Review [Volume 1, Issue 2, 2019, Pages 25-40]
Abdelsalam, Omar Elfarouk Solar Desalination by Humidification-Dehumidification Using Aspen plus Simulation [Volume 2, Issue 3, 2020, Pages 58-64]
ABDEL-SALAM, Tarek Saad Power Flow Analysis of Hybrid Renewable Energy Sources in Power System Applied For IEEE Six Buses. [Volume 3, Issue 3, 2021, Pages 36-45]
Abdeltawab, Shaimaa Prediction of Shear Behavior of Fiber Reinforced Concrete Beams Using Artificial Neural Networks [Volume 1, Issue 1, 2019, Pages 13-24]
Abdulaziz, Ahmed Plastic Waste Conversion to Oil Through the Pyrolysis Process [Volume 4, Issue 2, 2022, Pages 49-54]
Abed, Kamal Design, Manufacturing and Testing of a Hydraulic Press to Produce Oil from Egyptian Jatropha Seeds [Volume 2, Issue 1, 2020, Pages 8-15]
Abed, Kamal Characterization of the Extracted Oil by Screw Press from Egyptian Jatropha Seeds [Volume 2, Issue 2, 2020, Pages 22-30]
Abed, Kamal Ahmed Extracted jatropha oil preheating using exhaust heat recovery [Volume 3, Issue 3, 2021, Pages 53-60]
Abedel-Rehim, Zeinab Numerical Analysis for the Effect of Porosity on Thermal Energy Storing and Releasing in The Spongy Porous Medium [Volume 1, Issue 2, 2019, Pages 41-47]
Abouel-Seoud, Shawki A. Innovative Design and Performance Analysis of Solar-Powered Electric Vehicles for a Promising Approach for Green Transportation [Volume 5, Issue 1, 2023, Pages 15-25]
Abozina, sara fathy Modern control strategy applied to wave power hydraulic simulator [Volume 5, Issue 3, 2023, Pages 73-82]
Abuelezz, Ali Verification the Results of the NIS Hydrometers Calibration system [Volume 3, Issue 1, 2021, Pages 9-12]
Abuelezz, Ali Elsayed CFD Simulation with Experimental Validation for Heavy Oil-Water Flow in Horizontal Pipe [Volume 5, Issue 4, 2023, Pages 19-27]
Abu Hashish, H. Design, Manufacturing and Testing of a Hydraulic Press to Produce Oil from Egyptian Jatropha Seeds [Volume 2, Issue 1, 2020, Pages 8-15]
Ahmed, Yehia Punching Shear Behaviour of Flat Slabs Reinforced with U-Stirrups [Volume 4, Issue 1, 2022, Pages 21-30]
Ahuja, Manu Implementation of Smart Bulb Lighting System Using Android [Volume 2, Issue 1, 2020, Pages 16-21]
Alashker, Mohamed Hassan CFD Simulation with Experimental Validation for Heavy Oil-Water Flow in Horizontal Pipe [Volume 5, Issue 4, 2023, Pages 19-27]
Al-Bossly, Afrah Different Models of Random Walk [Volume 1, Issue 2, 2019, Pages 48-52]
Al-Bossly, Afrah Time Series Statistical Analysis by Using Artificial Neural Network techniques Case study: Forecasting Models [Volume 2, Issue 2, 2020, Pages 31-38]
Ali, Hassan Voltage Stability Enhancement and Power Oscillation Damping of a Grid-Connected Wind Power Plant based on Dynamic Optimized GA-PI Controller [Volume 1, Issue 1, 2019, Pages 1-8]
Ali, Mohamad Kamal PV Parameters Monitoring using Portable and Wireless Data Acquisition System. [Volume 4, Issue 2, 2022, Pages 31-39]
Ali, Wael Experimental Investigation and Performance Evaluation of a Solar Space Heating/Cooling and Ventilation System for a Poultry House in Egypt [Volume 2, Issue 4, 2020, Pages 70-76]
Al-Zordk, Walid A. Stress distribution pattern on mandibular molar restored by occlusal veneer effect of veneer material and dental bonding surface [Volume 4, Issue 4, 2022, Pages 99-107]
Amer, Abdelwahab Mohamed Managing the Engineering Projects Through the GIS Tools [Volume 2, Issue 4, 2020, Pages 77-90]
Amer, Abdelwahab Mohamed Toward Solving the Car Parking Issue For Egyptian Cities [Volume 3, Issue 4, 2021, Pages 61-75]
Awad, Magdy Naeem Autonomous Landmine Detection Robot Using SLAM navigation Algorithm [Volume 4, Issue 4, 2022, Pages 81-91]

B

Badr, Mervat A. Improving Productivity Using Six Sigma Methodologies: A Case Study on a Fluorescent Glass Tube Production Line [Volume 2, Issue 3, 2020, Pages 46-57]
Bakry, Ayman Numerical Investigation of The Effect of Airfoil Trailing Edge Inflation at low Reynolds Number [Volume 3, Issue 1, 2021, Pages 13-17]
Baraka, Seham Experimental Investigation and Performance Evaluation of a Solar Space Heating/Cooling and Ventilation System for a Poultry House in Egypt [Volume 2, Issue 4, 2020, Pages 70-76]
Bayoumi, Mohamed Verification the Results of the NIS Hydrometers Calibration system [Volume 3, Issue 1, 2021, Pages 9-12]
Bekair, Gomaa Annual Performance Evaluation of a Mobile Solar Water Pumping System [Volume 5, Issue 2, 2023, Pages 26-36]

D

Diab, Ahmed A. Zaki Voltage Stability Enhancement and Power Oscillation Damping of a Grid-Connected Wind Power Plant based on Dynamic Optimized GA-PI Controller [Volume 1, Issue 1, 2019, Pages 1-8]

E

Eid, Kamal Observation of Dual-Peak Signal-to-Noise Ratios from Plasmas Produced in Typical Laser-Induced Breakdown Spectroscopy (Libs) Experiments [Volume 2, Issue 1, 2020, Pages 1-7]
Eissa, Mahmoud Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste [Volume 4, Issue 2, 2022, Pages 40-48]
Elalfy, Ayman Toward Solving the Car Parking Issue For Egyptian Cities [Volume 3, Issue 4, 2021, Pages 61-75]
El-Anwar, Mohamed Ibrahim Angulated Dental Implant Versus Vertical One Finite Element Study [Volume 3, Issue 2, 2021, Pages 18-24]
El-Anwar, Mohamed Ibrahim Stress distribution pattern on mandibular molar restored by occlusal veneer effect of veneer material and dental bonding surface [Volume 4, Issue 4, 2022, Pages 99-107]
El-Arabi, Mohamed E. Identification and analysis of Servo-Pneumatic System using mixed reality environment. [Volume 3, Issue 3, 2021, Pages 46-52]
El-Feky, Amr Ahemd Numerical Investigation of The Effect of Airfoil Trailing Edge Inflation at low Reynolds Number [Volume 3, Issue 1, 2021, Pages 13-17]
ElGbary, Hisham S. Angulated Dental Implant Versus Vertical One Finite Element Study [Volume 3, Issue 2, 2021, Pages 18-24]
Elghetany, Hamdy Experimental Investigation and Performance Evaluation of a Solar Space Heating/Cooling and Ventilation System for a Poultry House in Egypt [Volume 2, Issue 4, 2020, Pages 70-76]
Elghetany, Hamdy Annual Performance Evaluation of a Mobile Solar Water Pumping System [Volume 5, Issue 2, 2023, Pages 26-36]
Elhammali, WISAM Experimental Non-linear Shear Behavior and Failure Mechanism of Low-Strength Reinforced Concrete Beams Strengthened with CFRP [Volume 4, Issue 1, 2022, Pages 12-20]
Elkafrawy, Mostafa Prediction of Shear Behavior of Fiber Reinforced Concrete Beams Using Artificial Neural Networks [Volume 1, Issue 1, 2019, Pages 13-24]
Elnady, Ahmed Prediction of Shear Behavior of Fiber Reinforced Concrete Beams Using Artificial Neural Networks [Volume 1, Issue 1, 2019, Pages 13-24]
Elrefaie, Mohamed Elfaisal CFD Simulation with Experimental Validation for Heavy Oil-Water Flow in Horizontal Pipe [Volume 5, Issue 4, 2023, Pages 19-27]
Elsaady, G. A. Voltage Stability Enhancement and Power Oscillation Damping of a Grid-Connected Wind Power Plant based on Dynamic Optimized GA-PI Controller [Volume 1, Issue 1, 2019, Pages 1-8]
Elsallamy, Waleed Sound insertion loss modelling for spark arrestors using two-port theory with experimental verification [Volume 3, Issue 2, 2021, Pages 25-28]
Elsayed, Ghada A Comparative Study between MATLAB HDL Coder and VHDL for FPGAs Design and implementation [Volume 4, Issue 4, 2022, Pages 92-98]
Elsayed, Ghada FPGA Design and Implementation for Pseudorandom Number Generator based square root (SR-PRNG) [Volume 5, Issue 1, 2023, Pages 8-14]
ElSayed, Abohashema M. Voltage Stability Enhancement and Power Oscillation Damping of a Grid-Connected Wind Power Plant based on Dynamic Optimized GA-PI Controller [Volume 1, Issue 1, 2019, Pages 1-8]
Elzahaby, Aly Numerical Investigation of The Effect of Airfoil Trailing Edge Inflation at low Reynolds Number [Volume 3, Issue 1, 2021, Pages 13-17]
El-Zawahry, Mohamed M. Angulated Dental Implant Versus Vertical One Finite Element Study [Volume 3, Issue 2, 2021, Pages 18-24]
EZZAT, Mohamed Power Flow Analysis of Hybrid Renewable Energy Sources in Power System Applied For IEEE Six Buses. [Volume 3, Issue 3, 2021, Pages 36-45]

F

Farrag, Nermin Mokhtar Toward Solving the Car Parking Issue For Egyptian Cities [Volume 3, Issue 4, 2021, Pages 61-75]
Farrag, Nermin Mokhtar Application of Pv-Piezohybrid Energy Floorin Egypt [Volume 4, Issue 1, 2022, Pages 1-11]

G

Gad, Mohammed Design, Manufacturing and Testing of a Hydraulic Press to Produce Oil from Egyptian Jatropha Seeds [Volume 2, Issue 1, 2020, Pages 8-15]
Gad, Mohammed Saber Characterization of the Extracted Oil by Screw Press from Egyptian Jatropha Seeds [Volume 2, Issue 2, 2020, Pages 22-30]
Gad, Mohammed Saber An experimental assessment of performance, emissions and combustion characteristics on a diesel engine burning rapeseed biodiesel blends [Volume 2, Issue 2, 2020, Pages 39-45]
Gad, Mohammed Saber Enhancement of diesel engine performance and emissions burning biodiesel with cerium oxide nanoparticles additive [Volume 3, Issue 2, 2021, Pages 29-35]
Gad, Mohammed Saber Extracted jatropha oil preheating using exhaust heat recovery [Volume 3, Issue 3, 2021, Pages 53-60]
Ghazy, Mohamed H. Stress distribution pattern on mandibular molar restored by occlusal veneer effect of veneer material and dental bonding surface [Volume 4, Issue 4, 2022, Pages 99-107]
Ghonima, Fathy Alaa eldin Power Flow Analysis of Hybrid Renewable Energy Sources in Power System Applied For IEEE Six Buses. [Volume 3, Issue 3, 2021, Pages 36-45]

H

Hanafy, Mohamed Modern control strategy applied to wave power hydraulic simulator [Volume 5, Issue 3, 2023, Pages 73-82]
Hassan, Salwa Numerical Analysis for the Effect of Porosity on Thermal Energy Storing and Releasing in The Spongy Porous Medium [Volume 1, Issue 2, 2019, Pages 41-47]
Hazem, Abdel-Rahman Behavior of Lightweight Reinforced Concrete Flat Slabs Subjected to Punching Shear [Volume 4, Issue 3, 2022, Pages 55-64]
Hegazy Fouda, Mahmoud Effect of Corrosion on Reinforced Concrete Footing Subjected To Eccentrical Loading [Volume 5, Issue 2, 2023, Pages 43-54]
Hussien, Ahmed Enhancement of diesel engine performance and emissions burning biodiesel with cerium oxide nanoparticles additive [Volume 3, Issue 2, 2021, Pages 29-35]
Hussien, Ahmed M. Innovative Design and Performance Analysis of Solar-Powered Electric Vehicles for a Promising Approach for Green Transportation [Volume 5, Issue 1, 2023, Pages 15-25]

I

Ibrahim, Said Design, Manufacturing and Testing of a Hydraulic Press to Produce Oil from Egyptian Jatropha Seeds [Volume 2, Issue 1, 2020, Pages 8-15]
Ibrahim, Said Characterization of the Extracted Oil by Screw Press from Egyptian Jatropha Seeds [Volume 2, Issue 2, 2020, Pages 22-30]
Ibrahim, Said Extracted jatropha oil preheating using exhaust heat recovery [Volume 3, Issue 3, 2021, Pages 53-60]
Ibrahim, Sherif Maher Solving Of Real-Color Digital Image Processing Problems by Converting Them to Their Corresponding Three Spectral Values to Enhancement the Remote Sensing Satellite Images Classification. [Volume 5, Issue 1, 2023, Pages 1-7]
Ismail, Ibrahim Mohamed Solar Desalination by Humidification-Dehumidification Using Aspen plus Simulation [Volume 2, Issue 3, 2020, Pages 58-64]
Ismail, Tamer Abdel Motaleb Experimental Investigation and Performance Evaluation of a Solar Space Heating/Cooling and Ventilation System for a Poultry House in Egypt [Volume 2, Issue 4, 2020, Pages 70-76]

J

Jalabi, Abdurrahman Adel Plastic Waste Conversion to Oil Through the Pyrolysis Process [Volume 4, Issue 2, 2022, Pages 49-54]

K

Kayed, Somaya Ismail A Comparative Study between MATLAB HDL Coder and VHDL for FPGAs Design and implementation [Volume 4, Issue 4, 2022, Pages 92-98]
Kayed, Somaya Ismail FPGA Design and Implementation for Pseudorandom Number Generator based square root (SR-PRNG) [Volume 5, Issue 1, 2023, Pages 8-14]
Khater, Mohamed Observation of Dual-Peak Signal-to-Noise Ratios from Plasmas Produced in Typical Laser-Induced Breakdown Spectroscopy (Libs) Experiments [Volume 2, Issue 1, 2020, Pages 1-7]

M

Maalawi, Karam Youssef Multi-Objective Optimization of Planetary Gear Train Using Genetic Algorithm [Volume 4, Issue 3, 2022, Pages 74-80]
Mabrouk, Rasha Punching Shear Behavior of Reinforced Concrete Flat Slabs with Steel Shearheads [Volume 3, Issue 4, 2021, Pages 76-87]
Mabrouk, Rasha Punching Shear Behaviour of Flat Slabs Reinforced with U-Stirrups [Volume 4, Issue 1, 2022, Pages 21-30]
Mahmoud, Tamer Elsayed Prediction of Shear Behavior of Fiber Reinforced Concrete Beams Using Artificial Neural Networks [Volume 1, Issue 1, 2019, Pages 13-24]
Mashaly, Osama Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste [Volume 4, Issue 2, 2022, Pages 40-48]
Mohamad, M. A PV Parameters Monitoring using Portable and Wireless Data Acquisition System. [Volume 4, Issue 2, 2022, Pages 31-39]
Mohamed, Esraa Khaled Solar Desalination by Humidification-Dehumidification Using Aspen plus Simulation [Volume 2, Issue 3, 2020, Pages 58-64]
Mohamed, Moamen Autonomous Landmine Detection Robot Using SLAM navigation Algorithm [Volume 4, Issue 4, 2022, Pages 81-91]
Mohamed, Mohamed Hamdy Verification the Results of the NIS Hydrometers Calibration system [Volume 3, Issue 1, 2021, Pages 9-12]
Mohamed, Naira Plastic Waste Conversion to Oil Through the Pyrolysis Process [Volume 4, Issue 2, 2022, Pages 49-54]
Mohamed ElShazly, Moataz Abdelgawad Development of a Mathematical Model Using Machine Learning for Hydroforming of Non-Circular Protrusion Copper T-Tube [Volume 2, Issue 4, 2020, Pages 91-100]
Mohamed ElShazly, Moataz Abdelgawad A Finite Element Analysis Verification of a Machine-Trained Mathematical Model of T-Tube Hydroforming [Volume 3, Issue 1, 2021, Pages 1-8]
Moharam, Omar Medhat Improving life cycle of asphalt pavement mixture using Self-Healing Techiuqe [Volume 5, Issue 3, 2023, Pages 63-72]
Mohsen, Marwa Implementation of Smart Bulb Lighting System Using Android [Volume 2, Issue 1, 2020, Pages 16-21]
Mosa, Gamal Said Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste [Volume 4, Issue 2, 2022, Pages 40-48]
Mostafa, Abdelzaher ezz eldeen Improving life cycle of asphalt pavement mixture using Self-Healing Techiuqe [Volume 5, Issue 3, 2023, Pages 63-72]
Mostafa, Hatem Effect of Corrosion on Reinforced Concrete Footing Subjected To Eccentrical Loading [Volume 5, Issue 2, 2023, Pages 43-54]
Mustafa, Hassan Characterization of the Extracted Oil by Screw Press from Egyptian Jatropha Seeds [Volume 2, Issue 2, 2020, Pages 22-30]
Mustafa, Hassan Mohammed Extracted jatropha oil preheating using exhaust heat recovery [Volume 3, Issue 3, 2021, Pages 53-60]

N

Nasr, Mohamed Fawzy Stress Analysis of a Shredder Blade for Cutting Waste Plastics [Volume 1, Issue 1, 2019, Pages 9-12]
Nasr, Mohamed Fawzy Multi-Objective Optimization of Planetary Gear Train Using Genetic Algorithm [Volume 4, Issue 3, 2022, Pages 74-80]

O

Omran, Mohamed Annual Performance Evaluation of a Mobile Solar Water Pumping System [Volume 5, Issue 2, 2023, Pages 26-36]
Omran, Shimaa Application of Pv-Piezohybrid Energy Floorin Egypt [Volume 4, Issue 1, 2022, Pages 1-11]
Oraby, Waleed abdel-Hady Modern control strategy applied to wave power hydraulic simulator [Volume 5, Issue 3, 2023, Pages 73-82]
Osman, Tarek Development of a Mathematical Model Using Machine Learning for Hydroforming of Non-Circular Protrusion Copper T-Tube [Volume 2, Issue 4, 2020, Pages 91-100]
Osman, Tarek Abd El-Sadek A Finite Element Analysis Verification of a Machine-Trained Mathematical Model of T-Tube Hydroforming [Volume 3, Issue 1, 2021, Pages 1-8]
Osman, Yahia Mohy El-Deen Torsion Behavior of Recycled Aggregates Concrete Beams With Openings [Volume 4, Issue 3, 2022, Pages 65-73]

R

Rabbo, Saber A. Identification and analysis of Servo-Pneumatic System using mixed reality environment. [Volume 3, Issue 3, 2021, Pages 46-52]
Rashed, Dawod Stress distribution pattern on mandibular molar restored by occlusal veneer effect of veneer material and dental bonding surface [Volume 4, Issue 4, 2022, Pages 99-107]

S

Saleh, Naguib Autonomous Landmine Detection Robot Using SLAM navigation Algorithm [Volume 4, Issue 4, 2022, Pages 81-91]
Sayed, Mahmoud M. Improving Productivity Using Six Sigma Methodologies: A Case Study on a Fluorescent Glass Tube Production Line [Volume 2, Issue 3, 2020, Pages 46-57]
Sayed, Mahmoud M. An experimental assessment of performance, emissions and combustion characteristics on a diesel engine burning rapeseed biodiesel blends [Volume 2, Issue 2, 2020, Pages 39-45]
Shalaby, Basel Stability and Volumetric Properties of Hot - Mixes Asphalt (HMA) Using Marble Powder Waste [Volume 4, Issue 2, 2022, Pages 40-48]
Sharafeldin, Yasmin Annual Performance Evaluation of a Mobile Solar Water Pumping System [Volume 5, Issue 2, 2023, Pages 26-36]
Shawky, Ashraf Adel Behavior of Lightweight Reinforced Concrete Flat Slabs Subjected to Punching Shear [Volume 4, Issue 3, 2022, Pages 55-64]
Shawky, Ashraf Adel Torsion Behavior of Recycled Aggregates Concrete Beams With Openings [Volume 4, Issue 3, 2022, Pages 65-73]
Shazly, Mostafa Development of a Mathematical Model Using Machine Learning for Hydroforming of Non-Circular Protrusion Copper T-Tube [Volume 2, Issue 4, 2020, Pages 91-100]
Shazly, Mostafa A Finite Element Analysis Verification of a Machine-Trained Mathematical Model of T-Tube Hydroforming [Volume 3, Issue 1, 2021, Pages 1-8]
Shiba, Mohamed Salah Eldin Innovative Design and Performance Analysis of Solar-Powered Electric Vehicles for a Promising Approach for Green Transportation [Volume 5, Issue 1, 2023, Pages 15-25]
Soliman, Ahmed Solar Desalination by Humidification-Dehumidification Using Aspen plus Simulation [Volume 2, Issue 3, 2020, Pages 58-64]

W

Waleed, Ahmed Plastic Waste Conversion to Oil Through the Pyrolysis Process [Volume 4, Issue 2, 2022, Pages 49-54]

Y

Yehia, Khaled Ahmed Stress Analysis of a Shredder Blade for Cutting Waste Plastics [Volume 1, Issue 1, 2019, Pages 9-12]
Yihia, Khaled Multi-Objective Optimization of Planetary Gear Train Using Genetic Algorithm [Volume 4, Issue 3, 2022, Pages 74-80]
Youssef, Ahmed Experimental Non-linear Shear Behavior and Failure Mechanism of Low-Strength Reinforced Concrete Beams Strengthened with CFRP [Volume 4, Issue 1, 2022, Pages 12-20]
Youssef, Ahmed Effect of Corrosion on Reinforced Concrete Footing Subjected To Eccentrical Loading [Volume 5, Issue 2, 2023, Pages 43-54]

Z

Zahran, Ali Abdelaziz CFD Simulation with Experimental Validation for Heavy Oil-Water Flow in Horizontal Pipe [Volume 5, Issue 4, 2023, Pages 19-27]
Ziada, Mohamed Numerical Analysis for the Effect of Porosity on Thermal Energy Storing and Releasing in The Spongy Porous Medium [Volume 1, Issue 2, 2019, Pages 41-47]